One of the many tasks of a homeowner is keeping the HVAC unit up and functioning properly. Unfortunately, not all homeowners know how to do this. Learning how best to select on HVAC professional to repair or replace heating and cooling equipment is one of the wisest things a savvy homeowner can do. The tips that follow will get you started.
Make sure you ask for an estimate in writing before choosing a specific HVAC vendor. There are a lot of moving pieces when it comes to purchasing these big items. You’ll want to compare not only the cost of the equipment, but also the set up and the overall energy costs.
Look for discounts wherever possible. HVAC systems can be rather costly, so you’ll want to seek out whatever discounts and deals that may be out there. When shopping around, ask about any current specials running, and look for discounts that are related to ENERGY STAR compliance. Both can save you a lot of cash.
When your contractor comes to fix your unit or install a new one, he should walk around your home and investigate what’s going on with your current set-up. They should be looking for how much insulation you have, where your windows are and what quality they are and more.
Make sure that your contractor provides a home assessment. Not every HVAC solution is for everyone. Your home could have special needs for heating and cooling. Your contractor should do a walk around of your space to judge what is best. If they aren’t be sure to request one.
If you currently have a manual thermostat, consider installing a programmable one. You can set your system for different temperatures depending on time of day and if anyone is home. Also, you can set upper and lower temperature settings to allow for a comfortable range of temperatures so that heating and cooling don’t kick in when not needed.
An HVAC system is a really expensive investment. This is why you should do some browsing before purchasing your system. Try to find a good sale so you can get your system at a discount. Check out a couple of sites before making a decision. A great site to begin is http://www.energystar.gov.
Turn off your air conditioner when no one is home to help save money. The house will heat up, but not too much. If will be constantly fighting the heat and using lots of electricity if it is left on all day.
In order to boost efficiency, place new outdoor https://www.amazon.com/Hvac-Air-Filter/s?ie=UTF8&page=1&rh=i:aps,k:Hvac Air Filter units or move your current unit to a place which resides in the shade. You save money this way because the air conditioner is now pulling in cooler air, which is easier to cool further.
Before having someone install a new HVAC system or maintain or repair yours, make sure they are insured. Having someone who is insured work on your system will assure that if anything happens while they are working at your home, they are financially covered and you will not be responsible.
Use plants to increase your air conditioner’s effectiveness. An AC unit fully shaded by trees and shrubbery can operate up to 10 percent more efficiently. However, do keep spacing in mind. Air flow must not be constricted, and technicians need room to work when they come out to service your unit.
To help your heating and cooling system run efficiently, install a radiant barrier in your attic. It blocks the heat from inside out, reducing the energy that’s needed for your home to get cooled during the summer. If you install the unit properly, you can even begin to use the attic as a bedroom as it will be so comfortable!
Make sure things don’t get too hot or cold where your thermostat is. Any electronics or heat sources like lamps or televisions nearby can trick the thermostat into thinking the home is warmer than it actually is. This just means it runs your air conditioning longer than necessary, wasting energy and money.
Want to save the most you can with your HVAC unit? Consider increasing your room temperature by a single degree or two. Each degree means money that stays in your pocket. In fact some estimate that each degree you move up can work out to be around 9% in overall energy savings.
It is important that you know the measurements of the area you need to cool. Normally, you need 20 BTU for each square foot that you wish to cool. Combine the square footage of all rooms, in the event that you will be cooling more than one.
You should do your research before hiring anyone to come to your home to complete any HVAC projects. Watching home improvements shows can be Air Filters deceiving since things rarely go as smoothly as they do on television. It is very important that you know what to expect before things get started.
If you hear clicking noises from your condenser fan, make sure that it is not striking something inside the unit. If it is not hitting something, it may be bent. Do not try to straighten the blades. This could cause it to become unbalanced. Simply replace the blade to ensure proper rotation.
If your HVAC unit is not operating as efficiently as it once was, check the evaporator coil in it? There may be some debris blocking it which is causing the issue. You can use a soft brush to clean it – like the one you find as an attachment for handheld vacuum cleaners.
Once you decide who you are buying from, talk to them about what they recommend. While you may have a certain system in mind, the contractor might have some good advice that leads you in another direction. Remember, all manufacturers are different, and you want a system with a good warranty.
Ask for referrals from friends and family. The best way to judge if an HVAC company is going to do a good job is from people who have actually used them. Ask your acquaintances if they have had work done, and find out if they were happy with the job, timeliness, and budget.
Now you’re able to see that you can learn about HVAC easily when you know a few tips first. Hopefully this guide is something that has taught you all that you need to know when you’re starting out. If you still have questions then make sure you do even more research!